You are succeed, I am wonderful

Back
Valve
Personal

Soft Seal Gate Valve

Close
√Specification √Product feature

  • Size：DN100
    Pressures：PN1.6
    Material：GGG50
    Temperature ：-40~300℃
    Design：GB

  • 1. Traditionally, sludge accumulates in the groove at the bottom of the valve after flushing through the water pipe. It is easy to cause water leakage because it can not be closed tightly. The bottom of the soft-sealed gate valve adopts the same flat-bottom design as the water pipe. It is not easy to cause sediment accumulation and make the fluid unobstructed.

    2. The valve uses high-quality rubber for the whole inside, the outer rubber, the domestic first-class rubber vulcanization technology makes the vulcanized valve to ensure accurate geometric size, and the rubber and ductile iron valve followed firmly, not easy to fall off and good elastic memory.

    3. Because the valve stem adopts the "O" ring seal ring design. The utility model can reduce the friction resistance of the switch, greatly reduce the leakage phenomenon and replace the sealing ring without stopping the water construction.

    4. The valve body is made of precision casting. The precise geometric dimension makes the valve body sealed without any finishing.

    5. The body is made of nodular cast iron, and the weight is reduced by about 20% to 30% compared with the traditional gate valve, and the maintenance is convenient.

Valve

Company

Video

    Home

    Valve

    Video

    Enterpirse

    News

    Show