Product overview

BYQ series electric actuator, is our company on the basis of the original mature products digest, absorb a variety of foreign advanced electric actuator design and manufacturing technology set fieldbus technology, absolute coding technology remote control technology, magnetic switch control and other latest automatic control technology as one, independent research and development of a new generation of products, angular travel electric actuator is usually called partial rotary actuator, Compact body structure, can be real surface self-locking, even in the case of power can keep the valve position unchanged. The gear sets are carefully designed to improve shock resistance and durability. Despite the actuator's travel limit, mechanical limits are designed to ensure that they are protected from being damaged by the drive during manual operation. For the larger torque valve device, the stack XQ series planetary reducer, and the output shaft coaxial connection installation, the same direction rotation.

Technical parameter

1. Power supply:

The motor is three-phase AC AC380V, 50Hz;

Control two-phase AC AC220V, 50Hz;

Optional power supply AC220~660V, 50, 60Hz(please specify when ordering)

2. Ambient temperature :-20°C~+60°C; Optional temperature :-40 ° C to +70 ° C

3, relative humidity: not more than 95%(25℃)

4. Working environment: common type is used in places without inflammable, explosive and strong corrosive media. Flameproof type (ExdlIBT4) uses explosive gas mixture of IA and IIB class T1-T4 groups in the environment.

5, protection level :IP65/67(special order IP68)

6, the motor is working system: rated running time of 10 minutes. Grade F insulation.

7, anti-corrosion coating: high temperature baking paint

Installation and removal

Allow the valve electric actuator to be installed in any position, but it must be noted that the motor should be in a horizontal position as far as possible, and the electrical box cover should be in a horizontal or vertical upward state as the recommended installation mode, which is conducive to lubrication, debugging, maintenance and manual operation.

Four wiring precautions

Use the hand wheel to open the valve to 50% of the open degree, press the open valve or close the valve key, check whether the rotation of the valve corresponds to the key, if inconsistent immediately press the stop key, cut off the three-phase power supply, replace any two phases of the three-phase power supply.