Structure principle of electric gate valve

Electric gate valve is simply to use electric actuator to control the valve, so as to realize the valve opening and closing. It can be divided into two parts, the upper part is the electric actuator, the lower part is the valve.

There are two kinds of electric gate valves, one is angular stroke electric valve: the electric actuator of angular stroke is used with the valve of angular stroke to realize the valve rotation within 90 degrees to control the flow of pipeline; The other is the direct travel electric valve: the direct travel electric actuator is used with the straight travel valve to realize the up and down action of the valve plate to control the flow of the pipeline. Usually used in equipment with a higher degree of automation, the valve horizontal installation adjustment accuracy is the best

The electric valve is usually connected by the electric actuator and the valve, and becomes an electric valve after installation and debugging. Electric valve uses electric energy as power to connect the electric actuator to drive the valve, to realize the valve switch, adjust the action. So as to achieve the purpose of switching or regulating the pipeline medium.

Flange ball valve,Y type steam filter, external thread globe valve, stainless steel steam solenoid valve, water solenoid valve electric ball valve stainless steel butterfly valve