1. Anti flash, anti cavitation, erosion resistance, corrosion resistance;

2. No vibration and low noise: under normal operation, the noise level is less than 72 dB at 1 m downstream of the regulating valve and 1 m from the pipe wall;

3. Close shut and leakage is in line with ANSI B16.104 V.

4. Good regulation characteristics, and can provide fast open, straight line or equal percentage flow characteristics according to user requirements.

5. Installation of valve internals is easy and easy to install.

6. Nominal diameter: DN20 ~ DN 150, to meet the requirements of power plant 50~600MW unit;

7. Nominal pressure: PN10~PN42MPa, maximum allowable pressure drop 32MPa.

8. Valve pipe interface: Standard for welding form, also can choose flange connection form.

9. The valve body can be straight through, angular and Z shaped.

10. The valve body is forged steel parts and the inner parts are high chromium heat-resistant stainless steel.

11. Any kind of driving device can be configured: electric, pneumatic or hydraulic actuator.