1. Anti flash, anti cavitation, erosion resistance, corrosion resistance;

2. No vibration and low noise: under normal operation, the noise level is less than 72 dB at 1 m downstream of the regulating valve and 1 m from the pipe wall;

3. Close shut, leakage is in line with ANS I B16.104 IV level, special requirements can reach V level.

4. Good regulation characteristics, and can provide fast open, straight line or equal percentage flow characteristics according to user requirements.

5. Installation of valve internals is easy and easy to install.

6. Nominal diameter: DN50~DN400, to meet the requirements of power plant 50~1000MW unit;

7. Nominal pressure: PN1.6~PN42MPa, maximum allowable pressure drop in valve 25MPa;

8. valve pipe interface: standard flange connection form, also can choose welding form.

9. The valve body is straight through shape, other forms are optional.

10. The valve body is cast (forged) steel and the inner parts are high chromium heat-resistant stainless steel.

11. Any kind of driving device can be configured: electric, pneumatic or hydraulic actuator.