High Temp. & High Pressure Wear-resisting Trunnion Mounted Ball Valve-Shanghai Power Station Valve Factory

High Temp. & High Pressure Wear-resisting Trunnion Mounted Ball Valve is one of the high performance products of Shanghai Power Station Valve Factory.

Features as below:

01 3 piece construction design.

Forged 3 piece body construction design, which can ensure the safety and reliability of the valve under special working conditions such as high temp. and high pressure.

02. Ball, Seat Sealing Harden Treatment

HVOF supersonic spraying hard alloy is applied to the valve ball surface and valve seat sealing surface to ensure high hardness, wear resistance and zero leakage.

03. Double Sealing Construction Design

The hard sealing floating valve seat at the upper and lower flow sides of the valve adopts a double sealing structure design. Even if one side of the valve seat fails to seal due to unexpected circumstances, the valve can still work normally, thus improving the sealing reliability of the valve.

04. Anti Blow out Stem, Anti static, Fire Safe

The valve stem is designed with an anti blow shoulder structure, which can ensure that the valve stem will not be blown out by the medium even when the valve chamber is abnormally pressurized.

 

The electrostatic grounding channel specially designed for anti-static can prevent fire or explosion hazards that may be caused by electrostatic sparks. In case of fire, the valve can effectively control the internal and external leakage of the valve in emergency state with the help of metal to metal auxiliary sealing structure and firesafe flexible graphite sealing structure.

05. Body Cavity Pressure Relief, Double Block and Bleed

When the liquid medium trapped in the valve cavity vaporizes due to temperature rise, resulting in abnormal pressure rise in the cavity and its pressure is greater than the pipeline medium pressure, the medium pressure in the body cavity can push the valve seat and automatically relieve pressure.

The valve seats at the upper and lower flow sides can independently cut off the medium at the inlet and outlet ends, realizing the double blocking function. The remaining medium in the body cavity can be discharged through the relief valve at the bottom.

 

06. Operator

Lever, Motor, Pneumatic, Pneumatic hydraulic Actuator

Nominal Pressure: PN6.4MPa-32.0MPa

Nominal Diameter: DN15mm-DN800mm

Body Material：A105、F22、F91、F92、F316、800H, etc.

The detailed materials can be selected according to the actual working conditions, which can meet the harsh working conditions such as high temp., high pressure, strong corrosivity and containing granular media. Under the working condition, the sealing is safe and reliable, the service life is long, the operation is convenient, and the pressure loss is small. Therefore, it is suitable for the high temperature or high pressure working conditions of power, oil and gas, chemical, metallurgy and other industries.

Picture/Catoon/Video was taken by Film&TV depart. of PRC Media.

Catalogue was produced by plan&design depart. of PRC Media.