Assistant valve enterprise to win the world
Release time:2023-02-25
Release time:2022-11-15
Release time:2022-08-11
Release time:2022-07-26
Release time:2022-07-26
Release time:2022-07-23
Release time:2022-11-29 Source View count:1962
(1) Cause of failure:
1. Poor operation causes the closing part to be stuck or exceed the upper dead point, and the connection is damaged and broken;
2. The sealing parts are not firmly connected, loose and falling off;
3, the connection material selection is wrong, can not withstand medium corrosion and mechanical wear.
(II) Troubleshooting method:
1, the correct operation, close the valve do not force too hard, open the valve do not exceed the upper dead point. After the valve is fully opened, the handwheel should be slightly reversed;
2, the closing part and the valve stem should be firmly connected, threaded connection should have a plug;
3. The fasteners used to connect the closing parts and the valve stem should be able to withstand the corrosion of the medium, and have a certain mechanical strength and wear resistance.
China Valve Media/Email:prcvalve@163.com
Source:China Valve Media
It is not based on scale but judge hero as per Mu. Recently, acc. to the document spirit of deepen the reform of "heroes per Mu" in 2023, the Reform...
View count:2023/8/30
Zhejiang Xuandong Valve Co., Ltd. (formerly Yuandong Plug Valve Branch) is located in Yongjia, Wenzhou, the famous hometown of pumps and valves in China.Surroun...
View count:2023/4/11
The advantage of plug valve applications is that the body mounted on the top of the whole is equivalent to the ball valve mounted on the top of the whole. It is...
View count:2022/11/29
(1) There is no contact between the sealing surface of the valve body and the sealing surface of the sliding plate during the opening and closing of the valve. ...
View count:2022/11/29
(1) Failure cause: (Valve leakage is the largest proportion of packing)1. Packaging selection is wrong, not resistant to moderate corrosion, not resistant to hi...
View count:2022/11/29
(1) Cause of failure:1. Poor operation causes the closing part to be stuck or exceed the upper dead point, and the connection is damaged and broken;2. The seali...
View count:2022/11/29
Recently, Zhejiang pump valve product Quality Inspection Center as the leading unit, Zhejiang Xuandong Valve Co., Ltd. as the main drafting unit, Zhejiang pump ...
View count:2022/11/28
According to the structure characteristics and design function of the plug valve, it can be selected according to the following principles.(1) For medium distri...
View count:2022/11/29